4 Steps For Your DIY Garage Door Replacement Panels Services

Garage doors are exposed to dust and dirt thus need a lot of repairing work. It’s one of the parts that is carelessly used in almost all of the houses. The misuse of garage doors can be one of the reasons why you need technicians so often. No matter how easy or tough the task is, the professional will charge you more as they have set some fixed rates for their basic services. The garage doors have many small parts that may wear out any time. So, you cannot say that you can get rid of the garage door repairing anytime. This thing goes for as long as you have the garage doors and they are being used.

The garage door parts include nuts, bolts, screws, panels and more. The parts get rotten over the period of time no matter how careful you are. The weather conditions in Wayne, West Chester, and Phoenix City have a great impact on them as well. However, to reduce the cost of repairing, you can go for DIY only if you are good with the tools. That is why we are sharing this article to guide you in the steps for garage door replacement panels.

Step# 1 – Finding The Right Panels

Before you began repairing, it is necessary to ensure the model of your garage door as well as the spare parts that need replacement. Once you have found the manufacturer of your garage door, you can contact them and ask them for the spare parts they have used. In case you did not find the manufacturer helpful, you can call other emergency garage door repair companies that sell the same garage door. They might help you or have the panels you are looking for. Our garage door company is one of those that can help you with every garage door need. Reach us for your garage doors.

Broken Panel Garage Door Repair PA

Step# 2 – Removing The Panels

Now you have found the garage door panels that you needed but before you began the repairing work, make sure that you have unplugged the doors if you have the automatic ones. Once done with switching off the doors, open the doors manually and remove the strings. This step is for the precautionary measure as the garage doors are heavy and springs are holding all the weight. They might be opened while you are working and causing you severe injuries. This action is so sudden that you cannot escape. That is why it is better to be on the safe side.

Garage door panels are usually joined with each other and have rollers on the side that run into track allowing the door to move up and down. If the rollers are in their best condition, do not go for garage door roller replacement. Remove the panels one by one. Be careful with the bolts and nuts as they are used to attach the panels. Loose the bolts and lift the panel up until it comes off and set it aside. Do the same with other panels as well.

Step# 3 – Replace The Panel

Once you have taken out the panel you do not need, replace it with the new one. Reattach the panels you have taken out. This process needs most of your attention as its time to fix everything back. Tighten up the bolts and nuts carefully so that you do not have to face any trouble in near future. Test the garage door.

Step# 4 – Finishing

The new panel you added in your garage door is probably different in color as compared to the other panels. You can repaint the garage door to match the look.

In case you find the steps difficult, call our garage door experts. Let them handle the job for you.

Leave a Comment

Your email address will not be published. Required fields are marked *


Back To Top Call Now Button